When we handle brick cleaning in Newport, TN, it comes down to three things: protecting your plants and property, cleaning with the right method, and walking the job with you at the end.
The right method for the job
When to book brick cleaning
- Green or black growth on shaded brick
- White powdery deposits (efflorescence)
- Soot on chimneys
- Mortar haze or paint drips
What causes the dirt and stains
- Shade and moisture
- Salts carried to the surface by water
- Soot and smoke
- Sprinkler water hitting the wall
Safe steps for homeowners
- Brush off dry efflorescence with a stiff brush before wetting it
- Fix gutters and downspouts that soak the brick
- Look for cracked or missing mortar before washing
Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.
What can go wrong with DIY pressure washing
- Eroding mortar joints with high pressure
- Driving water into old, soft brick
- Using acid without pre-wetting, which can burn the brick
Our process for brick cleaning
- Inspect brick and mortar condition
- Pre-wet and protect nearby surfaces
- Apply the right masonry cleaner or soft wash
- Rinse at low pressure
- Check for remaining stains and treat as needed
How much does brick cleaning cost?
What moves the price:
- Size: square footage of siding, roof or flatwork
- Condition: heavy growth, old stains and peeling finishes take longer
- Access: number of stories, roof pitch, slopes and how close we can park
- Add-ons: sealing, gutter brightening and other services done in the same trip
These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.
Brick Cleaning in Newport, TN
Mildew and algae are the main reason Tennessee homeowners wash their siding. Shaded walls can turn green within months, and pressure alone doesn't kill the growth, so we use a soft wash solution that does.
Spring pollen season in Tennessee coats houses, cars, screens and patios in a yellow-green film, and pollen gives mildew something to feed on. Many homeowners book their wash after pollen season ends so the house stays clean longer.
Red clay soil is common in parts of Tennessee. Rain splashes it onto the bottom of the siding, walls and walkways, and its iron-rich color can stain light surfaces. It usually needs a dedicated clay or rust cleaner rather than pressure alone.
Besides Newport (ZIP codes 37821 and 37822), we handle brick cleaning in White Pine (11.2 mi), Dandridge (13.1 mi), Morristown (18.1 mi) and Mosheim (20 mi). Call (555) 010-0000 for a free quote in Newport.
Brick Cleaning: frequently asked questions
How much does brick cleaning cost in Newport, TN?
Brick Cleaning typically costs $250-$700 for a typical brick home front or chimney, and usually takes 2-4 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.
Do you use high pressure for brick cleaning?
Brick Cleaning is done with low-pressure wash and masonry cleaners. Low pressure and the right solution remove growth and dirt without damaging the surface, and the growth takes longer to come back.
Is brick cleaning safe for my plants and pets?
We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.
How often should I schedule brick cleaning?
Every 2-3 years. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.
What if it rains on the day?
Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.